Modifications

Please remember that any modifications you undertake are entirely at your own discretion. While we aim to offer helpful guidance, we cannot assume responsibility for any resulting damage, injury, or loss. Proceed only if you feel confident in understanding the process and accept the associated risks

Common Modifications

Common Mods Easy bend off mean chute lip ⁠ 3d printed chute⁠ Med to Hard Artisan Mod ...

Belt Drive Drum Mod

Fits with modified electronics box. Quieter than stock RPM controllable via Artisan.BOM: A...

Solderless Artisan Installation

BOM QTY Arduino Nano 1 Arduino Nano Terminal 1 USB Cable 1 ...

Vented Electronics Enclosure

This 3D printed Enclosure was made by the Discord user LookattheGeeksFile:CHIMNEY_V4.3MFInstallat...

Thermocouple Mod

Hardware Components You’ll Need: Arduino Nano HW-550 Thermocouple (MAX6675) Module Jumper Wi...

Skywalker V1 HiBean Firmware Installation

Requirements This is still in Beta and code is still being worked on. Please report any issues y...

Skywalker V2 HiBean Firmware Installation

Requirements This is still in Beta and code is still being worked on. Please report any issues...

V1 to V2

Upgrading from V1 to V2

Drum Motor

How to connect and code for a nano or ESP32 to control the motor. Motor Wire Arduino...

Cubean

Cubean TX Protocol (Controller → Roaster) Direction: Arduino/controller → Cubean roaster ...

V1 Worm Drive Mod

BOMPWM Motor Boardhttps://www.aliexpress.us/item/3256804512610220.html Worm Drive Motor JGY 28...